BRIEF
You Can Add a Card Fee, but Only on Credit, Only Up to Your Cost, and Not in Every State
Yes, in most US states you can pass card fees to customers, but only on credit cards, only up to what the processor actually charges you (and never more than 3% on Visa), and only with notice and disclosure. On invoices of a few hundred dollars or more, offering bank transfer usually saves more money than a surcharge does.
Yes, on credit cards, with four rules most small businesses break
A small business in the US can add a surcharge to credit card payments. The card networks allow it, and federal law doesn't stop it. But the permission comes with conditions, and the common setup most owners use, a flat "3% card fee" on every invoice, usually breaks at least one of them.
- Credit cards only. You cannot surcharge debit cards or prepaid cards. That holds even when a debit card is run "as credit" or has a Visa or Mastercard logo. Plenty of clients pay invoices with debit, so a blanket card fee will catch them.
- Capped at your actual cost. The surcharge cannot be more than what you pay to process that transaction. Visa also sets a hard ceiling of 3%. So the limit is whichever is lower: 3% or your real fee.
- Notice before you start. Mastercard requires you to tell your processor (the company that handles your card payments, called the acquirer) at least 30 days before you begin surcharging. Do it in writing and keep the email.
- Disclosure before and after. The customer has to see the fee before paying: on the checkout page, at the register, or on the invoice. It then has to appear as its own line on the receipt, not folded into the total.
Then there is state law. At the time of writing, Connecticut and Massachusetts ban credit card surcharges outright. Colorado caps them at 2%. New York allows them, but the price you advertise has to be the card price, not the cash price with a fee added at the end. These laws have changed several times since 2013, and court rulings have struck down bans in other states. Check your state attorney general's website before you add a fee. Your processor's support team can usually tell you too.
What a surcharge actually recovers on real invoice sizes
The numbers below use Stripe's standard US online rates: 2.9% + 30¢ for cards, and 0.8% capped at $5 for ACH bank debits. Many invoicing tools charge something close to this. Your rate may differ, so pull one recent statement and redo the math with your own rate.
| Invoice | Card fee you pay | As a % of invoice | Most you can surcharge | ACH fee instead |
|---|---|---|---|---|
| $150 (portrait session) | $4.65 | 3.10% | $4.50 (3% cap) | $1.20 |
| $800 (brake job) | $23.50 | 2.94% | $23.50 (your cost) | $5.00 |
| $2,000 (wedding deposit) | $58.30 | 2.92% | $58.30 (your cost) | $5.00 |
| $6,000 (bathroom remodel draw) | $174.30 | 2.91% | $174.30 (your cost) | $5.00 |
Two things stand out. First, on anything above about $800, your real cost is under 3%. A flat 3% fee on a $6,000 invoice collects $180 against a $174.30 cost. That $5.70 gap is small, but it is exactly the overcharge the rules forbid.
Second, the surcharge gets processed too. Add $174.30 to the invoice and the processor takes 2.9% of that as well. That's about $5 more you never get back. A surcharge cuts your card cost a lot. It does not erase it.
If you take deposits, each payment is a separate charge with its own 30¢. That's another reason to put the fee rule on both the deposit invoice and the final invoice, not just one of them.
For invoices, a bank transfer option usually beats a surcharge
Look at the last column of the table again. On a $2,000 invoice, ACH costs $5 and the card costs $58.30. If half your clients switch to bank transfer, you save more than a surcharge would recover, without the legal checklist.
There is also a fully legal route in every state: a discount for paying by cash, check, or bank transfer. Federal law has protected discounts for non-card payment since 2010. The difference is how you word it. "$2,000, or $1,950 if paid by bank transfer" is a discount. "$1,950, plus 2.6% if paid by card" is a surcharge, and the surcharge rules apply. Same money for you, very different rules.
Here's how that plays out for a typical business. Say a contractor sends a $6,000 progress invoice with three options listed: ACH (free to the client), check, or card. Most commercial clients will pay by ACH once it is clearly offered, because their accounts team prefers it anyway. The contractor pays $5 instead of $174.30. And nobody has to read a surcharge disclosure.
Where a surcharge still makes sense: lots of small card payments at a counter, like a body shop's walk-in jobs or a clinic's copays. ACH isn't practical there, and the fee adds up across hundreds of transactions. Even then, your processor needs to support it properly. It should detect whether a card is credit or debit and only add the fee on credit.
If you do surcharge, set it up in this order
The order matters because the 30-day notice clock starts before anything else.
- Check your state. If you're in Connecticut or Massachusetts, stop here and use a cash discount instead. If you're in Colorado, your cap is 2%.
- Notify your processor in writing, at least 30 days ahead. Ask them directly whether their checkout can tell credit from debit and skip the fee on debit.
- Work out your real rate from a recent statement: total fees divided by total card volume. Set your surcharge at that rate or 3%, whichever is lower.
- Disclose it everywhere a client decides to pay. That means a sign at the counter, a line on the quote, and a line on the invoice next to the payment link. Put it on the quote too, so it isn't a surprise when the bill arrives. If you send payment reminders by email or text, keep the amount in those messages consistent with what the checkout will actually charge.
- Show it as a separate line on the receipt.
Whatever you invoice from, whether QuickBooks, Square, Stripe, or Fynl, the weak point is usually step 2. Many simple invoice tools add a percentage to every card payment and can't tell debit from credit. If yours can't, don't surcharge through it. Offer the ACH or cash discount instead.
Questions people also ask
Can I charge a fee on debit card payments?
No. Surcharges on debit and prepaid cards are not allowed, even if the card carries a Visa or Mastercard logo or is run as credit. You can still offer every customer a discount for paying by cash, check, or bank transfer.
Is a 3% card fee always allowed?
No. The cap is whichever is lower: 3% or what you actually pay to process the card. On flat-rate pricing like 2.9% + 30¢, your real cost falls below 3% on invoices above roughly $800, so a flat 3% overcharges there.
What's the difference between a surcharge and a convenience fee?
A surcharge is added because the customer chose a credit card. A convenience fee is a flat charge for paying through an alternative channel, like phone payment when you normally take payment in person. The two have separate rules, and a percentage fee labeled 'convenience fee' is usually treated as a surcharge.
Do I have to tell my card processor before adding a surcharge?
Yes. Mastercard requires notice to your processor at least 30 days before you start. Send it in writing and ask whether their checkout can automatically skip the fee on debit cards.
Sources
More on getting paid
Set Up Net 30 in QuickBooks So the Chasing Starts Without You
"30 days payment" (Net 30) means the client has 30 calendar days from the invoice date to pay you. The term ta
GETTING PAIDA 50% Deposit Invoice Is Really Two Invoices, and the Second One Has to Show the First
A 50% deposit invoice is a normal invoice for half the job, with its own number, a printed due date, and a lin
GETTING PAIDEmail the Record, Text the Nudge, and Put the Amount in the First Line
For anything involving money, send it by email so there is a record, and use a text or a call only to point th
One portal instead of five subscriptions
CRM, calendar, quotes, invoices, website and email — with the AI running on your own Claude or ChatGPT API key, so there is no markup on it.
See pricingMore posts